The incubator should be placed in a room with good ventilation conditions and no strong vibration, flammable and explosive items should not be placed around it, the installation room temperature of 5℃-35℃, relative humidity ≤85%, and no corrosive gases.
Electric thermostatic incubator and other incubators, before using the incubator, it is necessary to do the installation and debugging of the incubator.
Commissioning steps of electric thermostatic incubator:
1. Close the inner and outer doors of the glass door of the electric thermostatic incubator.
2. Plug in the power plug of the thermostatic incubator and turn on the power switch.
3. Set the temperature for the electric thermostatic incubator.
4. Observe whether the temperature of the electric thermostatic incubator rises, if the temperature rises to the set temperature, and maintain a constant temperature, indicating that the incubator is running normally.
5. Turn off the power of the electric thermostatic incubator.
The above is the five steps of the adjustment of the electric thermostatic incubator box, which are based on the use of the situation. Only under the implementation of such steps can we ensure that the electric thermostatic incubator has a good test effect.